TOOLS NEEDED • FLOOR JACK • 2 JACK STANDS 2 TON • 2 WHEEL CHOCKS • DRILL + 5/16-1132 DRILL BIT • SPRING COMPRESSOR • STANDARD HAND TOOLS BILL
Thank you for choosing Daystar Products Daystar recommends a certified technician install this system . In addition to these instructi
23. Wheel alignment is needed to be checked after installation. 24. All nuts and bolts needs to be checked after 500 miles. Front bumper Installat
4. With the track bar disconnected install the track bar drop down bracket (S10921) and mark the hole in the axle bracket that need to be drill
17. With the shackle on the frame shackle mount, install the stock shackle bolt into the shackle but don't tighten yet. 18
10. Once the coil spring is compressed , install it in the Jeep over the spring spacer. 11. Now that the coil springs are inst
Commentaires sur ces manuels