Daystar KJ03003BK Manuel d'utilisateur télécharger pdf

KJ03003 Jeep ZJ Front Control Arm Bushing Kit 1993-1998

Installation Instructions

1. Read all instructions completely and check the Bill of Materials before beginning the installation.

2. Raise and support the front of the vehicle with jack stands behind the rear leaf spring perches so that the tires just

touch the ground.

3. Remove one control arm at a time noting its position and how it is installed.

4. Remove the factory rubber bushings by burning out the centers with a suitable propane or acetylene torch. DO

NOT damages the outer shells, as they will be reused.

5. Clean the outer shells with a suitable tool so that they are free and clear of any debris.

6. Using the supplied Daystar Lubrathane, install the corresponding bushing, thrust washer, and steel sleeve into the

control arm sleeve per the figures below.

7. Reinstall the control arm into the position from which it was removed and torque to factory specifications.

8. Repeat this for the other three control arms.

9. Recheck all bolts and re-torque after 500 miles.

www.DaystarWeb.com

Tech Support Contact Info

[email protected]

Phone: 623.907.0081

Fax: 623.907.0088

841 South 71

Avenue

Phoenix, AZ 85043

Bill of Materials

Part No. Description Qty.

M02409 Thrust Washer 2

M02413 Bushing 2

M02411 Thrust Washer 4

M02414 Bushing 4

M02422 Bushing 2

M02428 Thrust Washer 2

S10091 Steel Sleeve 2

S10092 Steel Sleeve 4

S10100 Steel Sleeve 2

A01133 Daystar Lubrathane 1

WARNING

This vehicle has been modified to enhance its performance. The steering, braking and handling of this vehicle will differ from

standard passenger cars and trucks, This vehicle handles differently from an ordinary vehicle in driving conditions which may

occur on streets, highways and off road. Avoid unnecessary abrupt maneuvers, sudden stops, sharp turns and other driving

conditions that could cause loss of control, possibly leading to a roll over or other accident that could result in serious injury or

death to driver and passengers. If larger tires are installed the speedometer will read lower than the vehicle’s actual speed.

DRIVE WITH CARE, REDUCE SPEED AND WEAR SEAT BELTS AT ALL TIMES

This kit should be installed b

rofessional mechanic.

Instruction Sheet P10230-01

Installation Instructions 1

Résumé du contenu

Page 1 - Installation Instructions

KJ03003 Jeep ZJ Front Control Arm Bushing Kit 1993-1998 Installation Instructions 1

Commentaires sur ces manuels

Pas de commentaire

Daystar KJ03003BK Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Daystar KJ03003BK. Daystar KJ03003BK User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Daystar KJ03003BK